Texas Instruments TI-83 Recalling Graph Pictures (Pics)

8-18 DRAW Instructions
8308DRAW.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:29 PM Printed: 02/19/01 1:49
PM Page 18 of 20
To recall a graph picture, follow these steps.
1. Select 2:RecallPic from the DRAW STO menu. RecallPic
is pasted to the current cursor location.
2. Enter the number (from 1 to 9, or 0) of the picture
variable from which you want to recall a picture. For
example, if you enter 3, the TI-83 will recall the picture
stored to Pic3.
Note: You also can select a variable from the PICTURE
secondary menu ( 4). The variable is pasted next to
RecallPic.
3. Press Í to display the current graph with the
picture superimposed on it.
Note: Pictures are drawings. You cannot trace a curve that is part of a
picture.
To delete graph pictures from memory, use the
MEMORY DELETE FROM menu (Chapter 18).
Recalling Graph Pictures (Pics)
Recalling a
Graph Picture
Deleting a Graph
Picture