11-6 Lists
8311LIST.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 1:21 PM Printed: 02/19/01 1:37 PM
Page 6 of 18
To display the LIST NAMES menu, press y [LIST]. Each
item is a user-created list name. LIST NAMES menu items are
sorted automatically in alphanumerical order. Only the first
10 items are labeled, using 1 through 9, then 0. To jump to
the first list name that begins with a particular alpha
character or q, press ƒ [letter from A to Z or
q
].
Tip: From the top of a menu, press } to move to the bottom. From the
bottom, press † to move to the top.
Note: The LIST NAMES menu omits list names L1 through L6. Enter
L1 through L6 directly from the keyboard (page 11.3).
When you select a list name from the LIST NAMES menu,
the list name is pasted to the current cursor location.
• The list name symbol Ù precedes a list name when the
name is pasted where non-list name data also is valid,
such as the home screen.
• The Ù symbol does not precede a list name when the
name is pasted where a list name is the only valid input,
such as the stat list editor’s Name= prompt or the stat
plot editor’s XList: and YList: prompts.
To enter an existing list name directly, follow these steps.
1. Press y [LIST] ~ to display the LIST OPS menu.
2. Select B:Ù, which pastes Ù to the current cursor location.
Ù is not always necessary (page 11.16).
Note: You also can paste Ù to the
current cursor location from the
CATALOG (Chapter 15).
3. Enter the characters that comprise the list name.
Entering List NamesUsing the
LIST NAMES
Menu
Entering a User-
Created List
Name Directly