Statistics 12-13
8312STAT.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:42 PM Printed: 02/19/01 1:37
PM Page 13 of 38
To edit a list element, follow these steps.
1. Move the rectangular cursor onto the element you want
to edit.
2. Press Í to move the cursor to the entry line.
Note: If you want to replace the current value, you can enter a new
value without first pressing Í. When you enter the first
character, the current value is cleared automatically.
3. Edit the element in the entry line.
• Press one or more keys to enter the new value. When
you enter the first character, the current value is
cleared automatically.
• Press ~ to move the cursor to the character before
which you want to insert, press y [INS], and then
enter one or more characters.
• Press ~ to move the cursor to a character you want to
delete, and then press { to delete the character.
To cancel any editing and restore the original element at
the rectangular cursor, press ‘ Í.
Note: You can enter expressions and variables for elements.
4. Press Í, }, or † to update the list. If you entered
an expression, it is evaluated. If you entered only a
variable, the stored value is displayed as a list element.
When you edit a list element in the stat list editor, the list is
updated in memory immediately.
Editing a List
Element