19-10 Communication Link
8319LINK.DOC TI-83 Intl English, Chap 19 Bob Fedorisko Revised: 02/19/01 1:24 PM Printed: 02/19/01 1:40 PM
Page 10 of 10
To copy the exact contents of memory in the sending TI-83
to the memory of the receiving TI-83, put the other unit in
receive mode. Then, on the receiving unit, select C:Back Up
from the LINK SEND menu.
• Warning: C:Back Up overwrites the memory in the
receiving unit; all information in the memory of the
receiving unit is lost.
Note: If you do not want to do a backup, select 2:Quit to return to
the LINK SEND menu.
• Select 1:Transmit to begin transmission.
As a safety check to prevent accidental loss of memory,
the message WARNING . Backup is displayed when the
receiving unit receives notice of a backup.
• To continue with the backup process, select 1:Continue.
The backup transmission begins.
• To prevent the backup, select 2:Quit.
Note: If a transmission error is returned during a backup, the receiving
unit is reset.
When the backup is complete, both the sending calculator
and receiving calculator display a confirmation screen.
Backing Up Memory
Memory Backup
Receiving Unit
Memory Backup
Complete