9-6 Split Screen
8309SPLT.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:31 PM Printed: 02/19/01 1:36
PM Page 6 of 6
Note: Each set of numbers in parentheses above represents the row
and column of a corner pixel, which is turned on.
For Pxl.On(, Pxl.Off(, Pxl.Change(, and pxl.Test(:
• In Horiz mode, row must be {30; column must be {94.
• In G.T mode, row must be {50; column must be {46.
Pxl.On(row,column)
For the Text( instruction:
• In Horiz mode, row must be {25; column must be {94.
• In G.T mode, row must be {45; column must be {46.
Text(row,column,"text")
For the Output( instruction:
• In Horiz mode, row must be {4; column must be {16.
• In G.T mode, row must be {8; column must be {16.
Output(row,column,"text")
To set Horiz or G.T from a program, follow these steps.
1. Press z while the cursor is on a blank line in the
program editor.
2. Select Horiz or G.T.
The instruction is pasted to the cursor location. The mode
is set when the instruction is encountered during program
execution. It remains in effect after execution.
Note: You also can paste Horiz or G.T to the home screen or
program editor from the CATALOG (Chapter 15).
TI-83 Pixels in Horiz and G-T ModesTI-83 Pixels in
Horiz and G-T
Modes
DRAW POINTS
Menu Pixel
Instructions
DRAW Menu
Text( Instruction
PRGM I/O Menu
Output(
Instruction
Setting a
Split-Screen
Mode from the
Home Screen or
a Program