Texas Instruments TI-83 - page 221

Statistics 12-21
8312STAT.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:42 PM Printed: 02/19/01 1:37
PM Page 21 of 38
With SetUpEditor you can set up the stat list editor to
display one or more listnames in the order that you
specify. You can specify zero to 20 listnames.
SetUpEditor [listname1,listname2,...,listname n]
SetUpEditor with one to 20 listnames removes all list
names from the stat list editor and then stores listnames in
the stat list editor columns in the specified order,
beginning in column 1.
If you enter a listname that is not stored in memory
already, then listname is created and stored in memory; it
becomes an item on the LIST NAMES menu.
SetUpEditor with no listnames removes all list names from
the stat list editor and restores list names L1 through L6 in
the stat list editor columns 1 through 6.
SetUpEditor
Restoring L1
through L6 to the
Stat List Editor