Operating the TI-83 1-15
8301OPER.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 12:09 PM Printed: 02/19/01 1:34
PM Page 15 of 24
To recall and copy variable contents to the current cursor
location, follow these steps. To leave RCL, press ‘.
1. Press y ãRCLä. Rcl and the edit cursor are displayed on
the bottom line of the screen.
2. Enter the name of the variable in any of five ways.
• Press ƒ and then the letter of the variable.
• Press y ãLISTä, and then select the name of the list,
or press y [Ln].
• Press , and then select the name of the matrix.
• Press to display the VARS menu or ~ to
display the VARS Y.VARS menu; then select the type
and then the name of the variable or function.
• Press |, and then select the name of the
program (in the program editor only).
The variable name you selected is displayed on the
bottom line and the cursor disappears.
3. Press Í. The variable contents are inserted where
the cursor was located before you began these steps.
Note: You can edit the characters pasted to the expression without
affecting the value in memory.
Recalling Variable ValuesUsing Recall
(RCL)