Toshiba 451C, 351C, e-STUDIO281c manual Printer-specific Adjustments, PCL5c PCL6 PS3

3. Printer-specific Adjustments

PCL5c PCL6 PS3

(3) Open the property page of the printer driver. Mark the "Use Black for All Text" checkbox in the "Image Quality" tab.

*This adjustment will have an effect only on printing on the PCL5c, PCL6 or PS3 emulation printer driver. (This adjustment cannot be performed on the Macintosh printer driver.)

*This adjustment will be effective, only if print out a file created on a general application, such as Microsoft Office, in PostScript (PS3). Please be careful that it may not be effective, if you print out a file or PDF file created on a graphic application (e.g. Illustrator) or a DTP application (e.g. QuarkXPress).

After changing the printer driver settings, print and check the print image quality.

If further image quality adjustments are still necessary, the service technician must use the next procedure, because text may not be defined as 100% black on the file.

e-STUDIO281c/351c/451c 3.13