Toshiba e-STUDIO281c, 451C, 351C To Make the Pale Area of the Original Look Darker and Sharper

2. Copier-specific Adjustments

2.5 To Make the Pale Area of the Original Look Darker and Sharper

(To improve the highlight reproducibility)

Before the adjustment

The splashing area (highlight) is blurred.

‰Explanation

After the adjustment

A clear copy image of the splashing area is obtained.

Perform the copy density adjustment and background adjustment, in order to make the pale area (highlight) of the original look darker and sharper on the copy.

‰Procedures

*You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed below. You can use one procedure in conjunction with another. But if this changes the image quality more than required or loses effectiveness of the adjustment, restore the settings made in the previously used procedure to the original. Then perform the next procedure.

*Procedures (1) and (3) are used by the service technician, and by the user.

*Procedures (2) and (4) are used by the service technician only.

(1) Press the [IMAGE] button on the Control Panel. Press the [BACKGROUND ADJUSTMENT] button. Press the [DARK] button to darken the background.

After increasing the background density, copy and check the copy image quality.

With the background density set to the maximum, if further image quality adjustments are still necessary, the service technician must use the next procedure.

2.5 e-STUDIO281c/351c/451c