Toshiba 351C, 451C, e-STUDIO281c manual To Adjust the Image Quality Scanned from the Radf

2. Copier-specific Adjustments

2.18 To Adjust the Image Quality Scanned from the RADF

Before the adjustment

To scan an original placed on the original glass

To scan an original fed from the RADF

The reproducibility of background may vary, depending on how to scan an original.

‰Explanation

After the adjustment

To scan an original placed on the original glass

To scan an original fed from the RADF

The gap in the reproducibility of background is reduced.

The reproducibility of background may vary, depending on the type of original, or whether to scan an original placed on the original glass or fed from the RADF (MR-3018). Adjust the reproducibility of background, while scanning an original fed from the RADF, in order to minimize the gap in the reproducibility of background, using either of how to scan an original.

*Before performing this adjustment, make sure that the copier and RADF are correctly adjusted. Therefore, perform all the necessary adjustments. Only if further adjustment is still desired for the reproducibility of background, perform this adjustment.

2.18 e-STUDIO281c/351c/451c