3. Printer-specific Adjustments

PCL5c PCL6 PS3 Mac

(1) Enter adjustment mode [05]. Select code [395]. Press the [START] button.

• Image quality control will be forcibly performed to correct variations in image contrast.

After exercising image quality control, print and check the print image quality.

If further image quality adjustments are still necessary, use the next procedure.

PCL5c

PS3

* This adjustment will be effective, only if "Automatic" is selected from among the "Color" options on the printer driver.

Mac

* This adjustment will be effective, only if "Color" is selected from among the "Color Resolution Type" options on the printer driver.

(2) Perform the automatic calibration to correct variations in image density.

*[ADMIN] is selected from among the [CALIBRATION DISPLAY LEVEL] options by default. In other words, an administrator is authorized to operate the automatic calibration. But the [USER] option can also be selected to allow the user to operate it. Refer to the User Functions Guide for further information regarding how to select the [CALIBRATION DISPLAY LEVEL] option.

*Use steps (a) through (k) to perform the automatic calibration.

(a)Press the [USER FUNCTIONS] button on the Control Panel to enter the "User Functions" menu.

(b)Press the [ADMIN] button.

(c)Enter the 6-digit administrator password. Press the [ENTER] button.

(d)Press the [GENERAL] button.

(e)Press the [CALIBRATION] button.

(f)Press the [PRINT] button.

(g)Press the desired resolution button ([600 x 600] or [1200 x 600]) of the PDL ("PS3" or "PCL" emulation), which will be subjected to the calibration.

(h)Press the [CALIBRATION] button to print out the test chart.

(i)Place the printed test chart on the original glass.

(j)Press the [START] button to perform calibration. When the calibration comes to an end, the message "Scanning and calibrating" will disappear.

(k)The message "Is a result made to reflect?" will appear. Press the [YES] button.

* Automatic calibration correction will be applied to printing performed under the following conditions:

 

PC

 

 

Printer driver

 

Printing

Automatic calibration

 

 

 

 

type

correction

 

 

 

 

 

 

 

 

 

PCL5c

 

Color: Automatic

Color

Applied

 

 

 

Mono

Applied

 

Windows

 

 

 

Color: Mono

Mono

Not applied

 

PCL6

---

 

Mono

Not applied

 

 

PS3

 

Color: Automatic

Color

Applied

 

 

 

Mono

Applied

 

 

 

 

 

 

 

 

 

 

Color: Mono

Mono

Not applied

 

Macintosh

 

Color Resolution Type: Color

Color

Applied

 

 

Mono

Applied

 

 

 

 

 

 

 

 

 

Color Resolution Type: Mono

Mono

Not applied

*The [1200 x 600] button will be displayed, provided that the optional GC-1181 and GC-1230 expansion memories are installed.

*Repeat the above steps to correct the resolution of the PDL ("PS3" or "PCL" emulation), if necessary.

‰Cautions after the completion of the adjustment

Nothing in particular.

e-STUDIO281c/351c/451c 3.1

Page 97
Image 97
Toshiba 351C, 451C, e-STUDIO281c manual Printer-specific Adjustments