
1. General Adjustments – Copying, Printing and
A very small number of copies are output (approx. one copy per hour):
Use steps (a) to (b) and perform the adjustment of image quality control.
(a)Change the value for
* When a copy or print job is initiated, if the waiting period until image quality control is performed has already elapsed, image quality control is performed, first. Then a copy or print job will be performed.
Value for | Waiting period until image quality control is performed |
1 to 3 | 1 to 3 hours |
4 | 4 hours (default) |
(b)Change the value for code
Value for | Image quality control when the specified waiting period has already elapsed |
0 | Invalid |
1 | Valid: Mode 1 (default) |
2 | Valid: Mode 2 |
•After switching to mode 2, forcibly perform image quality control, as follows: Enter adjustment mode [05]. Select code [395]. Press the [START] button.
A large number of sheets are printed (hundreds of copies or more per day) and the image quality needs to be constantly maintained:
Change the value for code
* After a copy or print job is completed, if the accumulated number of sheets printed exceeds the specified value, image quality control will be performed.
Value for | Accumulated number of sheets printed until image quality control is performed |
1 to 9 | 100 to 900 sheets |
10 | 1,000 sheets (default) |
*Use code
with high accuracy. Therefore, never change the value for this code, unless otherwise required.
| Value for |
| Image quality control when the accumulated number of sheets |
|
| printed exceeds the specified value | |
|
|
| |
0 |
| Invalid | |
1 |
| Valid: Mode 1 | |
2 |
| Valid: Mode 2 (default) |
•After changing the value for code
After performing the adjustment, print and check the image quality.
If further image quality adjustments are still necessary, use the next procedure.
1.4