Toshiba 451C, 351C, e-STUDIO281c manual Text 05-1795 Set a value larger than 128 Black

2. Copier-specific Adjustments

(4) Enter adjustment mode [05]. Change the value for code [1795] to adjust the black density.

Color to be	Original mode	[05] code	Subcode	Value recommended	Acceptable	Default
adjusted					value range
K	Text	05-1795	0/1/2	Set a value larger than 128.	0 to 255	128
(Black)

*Set the value in increments of approximately 10, while checking the copy image until the optimum value is obtained.

*The subcode varies, according to the area for which the density is adjusted. Refer to the table below and

set the subcode for the area to be adjusted.

Subcode	Area for the density to be adjusted
0	Low-density area
1	Medium-density area
2	High-density area

‰Cautions after the completion of the adjustment

The adjustment may possibly cause the highly or deeply colored area, such as in a photo, to become blurred on the copy. Also, it may also cause offset failure, grained images and degradation in gradation. Therefore, carefully perform the adjustment, while checking the copy image.

2.11 e-STUDIO281c/351c/451c