Toshiba 451C, 351C To Scan and Print, while Minimizing Moiré, ‰ Explanation After the adjustment

4. e-Filing-specific Adjustments

4.6 To Scan and Print, while Minimizing Moiré

Before the adjustment

When the image stored in the e-Filing box is printed out, moiré is likely to occur.

‰Explanation

After the adjustment

The image stored in the e-Filing box can be printed out, while moiré is being minimized.

An original is scanned and stored in the e-Filing box (Scan to Box). When the image stored is printed directly from the e-Filing box, moiré may occur, depending on the type of original. Also, it is likely to occur, particularly when the original is scanned in Full color mode or Auto color mode in a high resolution (600 dpi) or even in Gray scale mode. Select an appropriate scan resolution or adjust the sharpness intensity in the scanning functions, in order to store the original and print it from the e-Filing box, while minimizing moiré.

‰Procedures

*You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed below. You can use one procedure in conjunction with another. But if this changes the image quality more than required or loses effectiveness of the adjustment, restore the settings made in the previously used procedure to the original. Then perform the next procedure.

*Procedures (1) and (2) are used by the service technician, and by the user.

*Procedure (3) is used by the service technician only.

4.6 e-STUDIO281c/351c/451c