Toshiba e-STUDIO281c Color mode, Original mode, code, Value recommended, Acceptable, Default

2. Copier-specific Adjustments

(3) Enter adjustment mode [05]. Change the values for codes [604 to 606], [1737 to 1741] and [1757] to adjust the sharpness intensity.

* Increasing the sharpness intensity will enhance the edges of the image.

Color mode	Original mode	[05] code	Value recommended	Acceptable	Default
				value range
Black	Text/Photo	05-604	Set a value larger than 16.	0 to 31	0
	Text	05-605
	Photo	05-606
	Text/Photo	05-1737
Full color	Text	05-1738	Set a value larger than 16.	0 to 31	0
	Printed image	05-1739
	Photo	05-1740
	Map	05-1741
Auto color	Text/Photo	05-1757	Set a value larger than 16.	0 to 31	0

*Setting "1" provides the softest image, while setting "31" provides the sharpest image. The default value ("0") provides an image as sharp as the one provided by setting "16."

Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the sharpness intensity by 3. If the sharpness intensity of the center value is changed, each step of the indicator will be changed accordingly. (For instance, if the center value is increased by 5 (sharper), the value of each step of the indicator will also be increased by 5 (sharper).)

<Note> "Sharpening the copy image" and "Minimizing moiré" are mutually contradictory. When an adjustment is performed to sharpen the copy image, moiré may occur.

‰Cautions after the completion of the adjustment

Nothing in particular.

‰Remarks

•Enter the value within the recommended value range mentioned in the procedures. Otherwise, it may cause a loss in copier performance, including degradation in the image quality.

•Procedures (2) and (3) provide the same effect of the adjustment. However, procedure (3) allows more flexible adjustment.

e-STUDIO281c/351c/451c 2.9