DETAILS September 2006
B706-46
6.10 STAPLING Z-FOLDED PAPER
Here is the operation sequence for jogging and stapling Z-folded sheets:
1. The lower jogger fence lifts to receive the Z-folded sheets.
2. The top fence moves down, to the horizontal position.
3. A sheet of paper goes into the stapler tray.
4. The positioning roller turns when each sheet is fed to the stapler tray.
5. Each sheet is fed down against the lower jogger fence to align the bottom edge.
6. After the set number of sheets come in, the jogger top-fence motor switches on
and lowers the top fence against the top of the stack. This aligns the stack for
stapling.
7. The bottom fence motor lowers the aligned stack to the stapling position.
8. The stapler staples the stack.
B706D004.WMF
B706D004.WMF
B706D005.WMF
06/09