April, 2007 SERVICE PROGRAM TABLES 5-73
2841
Sp2:FC:LL Special Paper 2: FC Low
2842
Sp2:FC:ML Special Paper 2: FC Medium Low
2843
Sp2:FC:MM Special Paper 2: FC Medium
These SPs set the standard values of the electrical charges that are applied to 1)
create bias for image transfer from drum to ITB, 2) create bias for image transf er
from ITB to paper (PTR), and 3) neutralize the charges on the both sides of the
paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used when printing on Special Paper 2 in the full-color mode and are applied only t o
the image area.
2841 2842 2843
017
Side1:PTR [10~250/5%] [10~250/5%] [10~250/5%]
018
Side1:SepDC
019
Side1:SepAC
027
Side2:PTR
028
Side2:SepDC
029
Side2:SepAC
2844
Sp2:FC:MH Special Paper 2: FC Medium High
2845
Sp2:FC:HH Special Paper 2: FC High
2844 2845
017
Side1:PTR [10~250/5%] [10~250/5%]
018
Side1:SepDC [10~250/5%]
019
Side1:SepAC [10~250/5%] [10~250/5%]
027
Side2:PTR [10~250/5%]
028
Side2:SepDC
029
Side2:SepAC
2851
Sp3 K Bias Set Bias for Special Paper 3: K
These SPs set the standard values of the electrical charges that are applied to 1)
create bias for image transfer from drum to ITB, 2) create bias for image transf er
from ITB to paper (PTR), and 3) neutralize the charges on the both sides of the
paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used when printing on Special Paper 3 in the black-and-white mode and are applied
only to the image area.
001
ITB [0~500/0.1 µa]
007
Side1:PTR [-100~0/1 µa]
008
Side1:SepDC [0~100/0.1 µa]
009
Side1:SepAC [80~120/0.1 kV]
012
Side2:PTR [-100~0/1 µa]
013
Side2:SepDC [0~100/0.1 µa]
014
Side2:SepAC [80~120/0.1 kV]