Toshiba e-STUDIO4500c/5500c SERVICE PROGRAM TABLES April, 2007 , 5-82

SERVICE PROGRAM TABLES April, 2007
5-82
3042
Set Vtref Cor Set Vtref Correction
Vtref is frequently updated in the toner supply cycle to stabiize the concent ration of
toner in the developer. Vtref is corrected between every printed page in the paper
path using the correction amounts listed below for each color. This is the defa ult
setting (0) for SP3042 001. However, you can use this SP to switch this function
OFF.
Vtref (TD sensor reference voltage). It is frequently updated to stabilize the toner
concentration in the development unit.
001 Vtref Corr Mode [0~1/1] 0:On, 1:Off
Setting this SP to 1 switches of Vtref correction between
pages.
002 Corr Amt(+):k
003
Corr Amt(+):M
004 Corr Amt(+):C
005 Corr Amt(+):Y
[0~100/0 V]
006 Corr Amt(-):k
007 Corr Amt(-):M
008
Corr Amt-:C
009 Corr Amt(-):Y
[0~100/0 V]
010 Vtref Corr Target:K
011 Vtref Corr Target:M
012 Vtref Corr Target:C
013 Vtref Corr Target:Y
[-100~0/cm2]
014 Corr Thresh:M
015 Corr Thresh:C
016 Corr Thresh:Y
017 Corr Thresh:K
[-100~0/cm2]
3101
ID Pattern:Disp ID Sensor Pattern Coverage Display
Displays the amount toner to be used (coverage) to create the ID sensor patterns
between pages. The ID sensors cannot accurately detect the patterns if there is too
much reflectivity from the black toner. This SP changes the solid ID sensor patt e r n to
a hatched pattern.
Note: SP3171 001 sets detection and update timing for the creation of the ID sensor
patterns.
001 Applied:K
002 Applied:M
003 Applied:C
004 Applied:Y
[0~2000/cm2]