DUPLEX UNIT August 2006
6-144
6.16.3 INVERTER OPERATION

Inverter Feed-in and Jogging

Just after the main switch is turned on:
• Duplex jogger motor [A] (a stepper motor) moves the jogger fences [B] to home
position (determined by the duplex jogger HP sensor [C]).
When the Start key is pressed:
• Motor [A] positions fences [B] 12 mm away from the selected paper size to wait
for the paper.
• Inverter entrance roller [D] feeds paper to the jogger section  The paper
pushes down the junction gate [E].
After the paper passes through the gate:
• Mo tor [A] moves the jogger fences [B] in to square the paper. This happens
every page.
• Next, the jogger fences move back to the previous position (12 mm away from
the paper)
B132D506.WMF
B132D507.WMF
[D]
[E]
[A]
[B]
[C]