SERVICE PROGRAM TABLES April, 2007 5-48
2313
Margin FC Bias Margin FC Bias: Setting for K
This SP sets the image transfer bias for each in areas of the image where nothing
is printed in the full-color mode.
2314
Set ProCon Bias Process Control: Bias Setting for K
This SP sets the image transfer bias for each color during the process control self-
check.
2315
Set MUSIC Bias MUSIC Bias Setting
This SP sets the image transfer bias for each color during MUSIC.
Note:
Full Speed: 52 to 128 g/m² (normal paper)
Half Speed: 128 to 256 g/m² (thick paper)
2313 2314 2315
011
Full Spd:ITB:K [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
012
Full Spd:ITB:M [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
013
Full Spd:ITB:C [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
014
Full Spd:ITB:Y [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
016
Full Spd:PTR [-6~0/1µA] [-6~0/1µA] [-6~0/1µA]
017
Full Spd:SepDC [0~100/0.1µA] [0~100/0.1µA] [0~100/0.1µA]
018
Full Spd:SepAC [80~120/0.1µA] [70~100/0.1µA] [80~120/0.1µA]
020
Half Spd:ITB:K [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
021
Half Spd:ITB:M [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
022
Half Spd:ITB:C [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
023
Half Spd:ITB:Y [0~500/0.1µA] [0~500/0.1µA] [0~500/0.1µA]
025
Half Spd:PTR [-100~0/1µA] [-100~0/1µA] [-100~0/1µA]
026
Half Spd:SepDC [0~100/0.1µA] [0~100/0.1µA] [0~100/0.1µA]
027
Half Spd:SepAC [80~20/0.1kV] [80~20/0.1kV] [80~20/0.1kV]
2316
Pwr On Jam Bias Power On/Jam Recovery: Bias Setting
Sets the image development bias to be applied for each color after recovery from a
paper jam at power ON.
002 ITB:K [0 to 50/0.1 µA]
003 ITB:M
004 ITB:C
005 ITB:Y
007 PTR
2381
Ptype K:LL Paper Type K: LL
This SP sets image transfer bias for LL (lowest) speed during black-and-white
copying in areas where black is used to develop the image.
006
Full Spd:ITB [10~250/ 1%]
011
Half Spd:ITB [10~250/1%]