SERVICE PROGRAM TABLES April, 2007 5-60
2541
Thk:FC:LL Thick Paper: FC Low
2542
Thk:FC:ML Thick Paper: FC Medium Low
2543
Thk:FC:MM Thick Paper: FC Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute hu midity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2541 – Up to SP2304 001: Threshold 1
SP2542 – More than SP2304 001 Threshold 1, up to SP2304 002 Threshold 2.
SP2543 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
These settings apply 1) only where the image is created in full-color on thick paper
(128~256 g/m2) at full speed.
2541 2542 2543
017
Side1:PTR [10~250/1%] [10~250/1%] [10~250/1%]
018
Side1:SepDC [10~250/1%] [10~250/1%]
019
Side1:SepAC [10~250/1%] [10~250/1%]
027
Side2:PTR [10~250/1%] [10~250/1%]
028
Side2:SepDC [10~250/1%] [10~250/1%]
029
Side2:SepAC [10~250/1%] [10~250/1%]
2544
Thk:FC:MH Thick Paper: FC Medium High
2545
Thk:FC:HH Thick Paper: FC High
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute hu midity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2544 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2545 – More than SP2304 004 Threshold 4
These settings apply 1) only where the image is created in full-color on thick paper
(128~256 g/m2) at full speed.
SP2544 SP2545
017
Side1:PTR [10~250/1%] [10~250/1%]
018
Side1:SepDC [10~250/1%] [10~250/1%]
019
Side1:SepAC [10~250/1%] [10~250/1%]
027
Side2:PTR [10~250/1%] [10~250/1%]
028
Side2:SepDC [10~250/1%] [10~250/1%]
029
Side2:SepAC [10~250/1%] [10~250/1%]
2601
OHP K Bias Set Bias for Transparency: K
This SP sets the following standard bias voltages applied for the image area on OHP
in the black-and-white mode at 1) image transfer from drum to ITB, 2) image transfer
from ITB to paper, and 3) at paper separation from the ITB.
001
ITB [0~500/0.1 µA]
002
PTR [-100~0/0.1 µA]
003
SepDC [0~100/0.1 µA]
004
SepAC [80~120/0.1 µA]