RESETS April, 2007
5-8
5.2.2 SOFTWARE AND SETTING RESET

Software Reset

The software can be rebooted when the machine hangs up.
To do a software reset:
Turn the main power switch OFF and ON.
-or-
Press and hold down [•/] and [#] together for at least 10 seconds.
When the machine beeps once, release both buttons. After “Now loading. Please
wait” is displayed for a few seconds, the copy window will open. The machine is
ready for operation.

Resetting the User Tool Settings

The system settings in the UP mode can be reset to their defaults with this
procedure.
1. Make sure that the machine is in the copier standby mode.
2. Press the [User Tools] key.
3. Hold down the [#] key and press “System Setting” on the display.
4. A confirmation message will be displayed, then press “Yes”.

Resetting Copy/Document Server Features Only

The copy/document server settings in the UP mode can be reset to their defaults
with this procedure.
1. Make sure that the machine is in the copier standby mode.
2. Press the [User Tools] key.
3. Hold down the [#] key and press “Copy/Document Server Features” on the
display.
4. When the message appears, press “Yes”.

Resetting Scanner Features Only

The scanner settings in the UP mode can be reset to their defaults with this
procedure
1. Make sure that the machine is in the copier standby mode.
2. Press the [User Tools] key.
3. Hold down the [#] key and press “Scanner Features” key.
4. When the message appears, press “Yes”