August 2006 COVER INTERPOSER TRAY (B704)
1-111
Installation
Attaching the Corner Plates for the B706
Important:
• The corner plates are installed on the B706 only.
Right Rear Corner Plate (B706 only)
1. Temporarily attach the screws [A] (with about two turns) to the right end of the
finisher extension table [B] ( x 2, tapping M4 x 8)
NOTE: The holes are not visible because they are covered with tape. Just
punch the screws through the holes.
2. Align the cutouts [C] of the right rear corner plate [D] with the screws and attach
the plate.
3. With a long screwdriver inserted through the cutouts in the right rear corner
plate [D], tighten the screws to fasten the right rear corner plate to the table
extension [B].

NG OK

B704I112.WMF
[A]
[B]
[C]
[D]