Toshiba e-STUDIO4500c/5500c What Happens if Dust is Detected?

August, 2006 SCANNER UNIT
6-37
Detailed
Descriptions
What Happens if Dust is Detected?
If dust is detected, the position where the scanner stops below the ARDF exposure
glass to scan the original is moved by 0.7 mm.
The scanning position can be shifted two times in 0.7 mm increments, towards the
scanning reference point at the upper left corner of the exposure glass.
Home Position a
From Book Read Position: 34 mm
Shift Direction: a Æ b Æ c
If dust is detected after the scanner has been moved two times, an alert is
displayed, but the job does not stop.
Then, at the start of the next job, the scanner stays at position (c). But if dust is
detected at (c), the scanner goes back to home position (a) and the dust detection
process starts again.
0.7 mm 0.7 mm
abc
34 mm
B132D975.WMF
Exposure Glass
Scale