Toshiba e-STUDIO4500c/5500c August, 2006 SERVICE PROGRAM TABLES , 5-135

August, 2006 SERVICE PROGRAM TABLES
5-135
6104
Punch Hole Reg 2 Punch Hole Control
This SP determines whether the finisher entrance roller stops to correct skew when
paper enters the finisher.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 12" x 18"
012 Custom Size
[0~2/1]
0: No adjustment. Quickly restores the default setting of you
forget what the other settings do.
0: Paper stops for skew correction
1: Paper does not stop
2: Paper stops (same as default)
6105
Fine Adj Staple Fine Adjust Staple Jogger Fence Postion
This SP corrects the distance between the jogger fences and the sides of the stack
on the finisher stapling tray.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 12"x18"
012 Custom Size
[-15~+15/0.5 mm]
+ Value: Increases distance between jogger fences and the
sides of the stack.
- Value: Decreases the distance between the jogger fences
and the sides of the stack.
6106
Fine Adj Out Jog Fine Adjust Output Jogger Unit Fences
This SP corrects the distance between the jogger fences and the sides of the stack
when the output jogger unit attached to the side of the machine jogs sheets as they
exit the finisher.
+ Value: Increases distance between jogger fences and the sides of the stack.
- Value: Decreases the distance between the jogger fences and the sides of the
stack.
001 A3 SEF [-15~+15/0.5 mm]
002 B4 SEF
003 A4 LEF
004 B5 LEF
005 DLT SEF [-15~+15/0.5 mm]
006 LT LEF [-15~+15/0.5 mm]
007 Custom [-15~+15/0.5 mm]