August, 2006 COPIER E-STUDIO4500C/5500C
1-25
Installation
11. Locate the transfer belt release lever [A]. It was removed earlier with the
shipping tape.
12. Attach the transfer belt release lever.
13. Turn it to the vertical position and make sure that it locks.
Important:
• The transfer belt release lever must be turned up and locked in position
before you install the toner hopper.
• IF YOU FORGET TO ATTACH THE TRANSFER BELT RELEASE LEVER [A], THIS WILL
CAUSE AN ID SENSOR ERROR (SC410 TO SC413).
B132I707.WMF
[A]