Adjusting Copying Options
Erasing the Edges of Copy Documents
You can clean the edges of your copies, eliminating unwanted material from printing, by specifying the amount to erase on the right, left, top, and/or bottom edge.
To erase edges on copies:
1.On the control panel, press the Copy button.
2.Select Edge Erase, and then press the OK button.
3.To erase the left edge:
a.Select Left, and then press the OK button.
b.Select a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0 through 25 mm (in 1 mm increments), and then press the OK button.
4.To erase the right edge:
a.Select Right, and then press the OK button.
b.Select a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0 through 25 mm (in 1 mm increments), and then press the OK button.
5.To erase the top edge:
a.Select Top, and then press the OK button.
b.Select a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0 through 25 mm (in 1 mm increments), and then press the OK button.
6.To erase the bottom edge:
a.Select Bottom, and then press the OK button.
b.Select a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0 through 25 mm (in 1 mm increments), and then press the OK button.
When you select Edge Erase, a page icon displaying the edge erase setting appears on the right side of the control panel display.
Note: The factory default is Off (edge erase of 0 on all sides).
Phaser® 8510/8560MFP Multifunction Product
