
Moving and Repacking the System
Moving and Repacking the System
This section includes:
■Precautions for Moving the System on page
■Moving the System Within the Office on page
■Preparing the System for Shipment on page
Caution: Parts of the system are hot. To avoid personal injury or damage to the system, allow the ink to solidify. Run the Shutdown for Moving System procedure on the control panel to cool the system quickly.
Precautions for Moving the System
To view precautions and guidelines for safely moving your system, see User Safety on page
Moving the System Within the Office
To move the system within the office:
1.Close the system’s door and covers.
2.Press the power switch located under the interface cover on the side of the system.
3.Within 10 seconds after turning off the system, select Shutdown for Moving System on the control panel.
Note: If you receive a Power Down
Phaser® 8510/8560MFP Multifunction Product