Moving and Repacking the System
Preparing the System for Shipment
Before shipping the system:
1.Remove the maintenance kit and waste tray. See Removing the Maintenance Kit and Waste Tray on page
2.Turn off the system. See Turning Off the System on page
3.Remove the document feeder and scanner. See Removing the Document Feeder and Scanner on page
4.Pack the system. See Packing the System on page
Repack the system using the original packing material and boxes or a Xerox repackaging kit. Additional instructions for repacking the system are provided in the repackaging kit. If you do not have all the original packaging, or are unable to repackage the system, contact your local Xerox service representative.
Caution: Damage to the system resulting from improper moving or failure to repackage the system properly for shipment, is not covered by the warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details.
Phaser® 8510/8560MFP Multifunction Product
