Solving
Random Light Stripes
Problem
Light stripes appear randomly on the test page when one or more color bars is missing.
Light Stripes Test |
Solution
To prevent random light strips from appear on the page:
1.On the control panel, press the System button.
2.Select Troubleshooting, and then press the OK button.
3.Select Print Quality Problems, and then press the OK button.
4.Select Eliminate Light Stripes, and then press the OK button.
a.Select Basic, and then press the OK button. Repeat this procedure up to two times to eliminate light stripes.
b.If the problem continues, select Advanced, and then press the OK button. Follow the control panel prompts to select the missing jet’s color and number. See the Light Stripes Test page to determine the color and jet number.
5.If light stripes continue to appear:
a.Turn off the system for at least four hours.
b.Turn on the system and, if necessary, repeat the Basic procedure once.
Phaser® 8510/8560MFP Multifunction Product
