Printing on Specialty Media
3.Insert transparencies into the tray.
Note: Do not load transparencies above the transparency fill line inside the tray.
4.On the control panel, press the OK button if the correct paper size and Transparency are displayed as the current setup, or select the transparency size and type:
a.Select Change setup, and then press the OK button.
b.Select the appropriate transparency size, and then press the OK button.
c.Select Transparency, and then press the OK button.
5.In the printer driver, select either Transparency as the paper type or Tray 1 as the paper source.
Phaser® 8510/8560MFP Multifunction Product
