Managing Fax Functions
Inserting Pauses in Fax Numbers
Some fax numbers require one or more pauses during the dialing sequence.
To insert pauses in a fax number:
1.On the control panel, press the Fax button.
2.Select Fax To, and then press the OK button.
3.When entering a fax number using the alphanumeric keypad, press the Pause button to insert a pause (represented by a comma) in the fax number where appropriate.
4.Press the Start button to send the fax.
Changing the Pause Setting
To change the pause setting:
1.On the control panel, press the System button.
2.Select Troubleshooting, and then press the OK button.
3.Select Fax Problems, and then press the OK button.
4.Select Dial Delay, and then press the OK button.
5.Follow the onscreen prompts to select a new time setting for pause entries, and then press the OK button.
Note: The factory default is three seconds.
Phaser® 8510/8560MFP Multifunction Product
