Adjusting Copying Options
Lightening or Darkening the Image
To lighten or darken an image when it is copied, press the Lighten/Darken button on the control panel to select a lighten/darken option.
Adjusting the Contrast of the Image
To reduce or increase the contrast of the image when it is copied:
1.On the control panel, press the Copy button.
2.Select Contrast, and then press the OK button.
3.Select a whole number from Highest (+3) to Lowest
Note: The factory default is 0.
Automatically Suppressing Background Variations
When you are using originals printed on thin paper, text or images printed on one side of the paper can sometimes be seen on the other side of the paper. To prevent this from happening in your copy document, use the Auto Suppression setting to minimize the sensitivity of the scanner to variations in light background colors.
To change this setting:
1.On the control panel, press the Copy button.
2.Select Auto Suppression, and then press the OK button.
3.Select either On or Off, and then press the OK button.
Note: The factory default is Off.
Adjusting Scan Sensitivity to Laser Originals
The Laser Originals option enables you to turn on/off optimizing scan sensitivity to originals printed on laser systems and printers.
To select an optimization option:
1.On the control panel, press the Copy button.
2.Select Laser Originals, and then press the OK button.
3.Select On or Off, and then press the OK button.
Note: The factory default is Off.
Phaser® 8510/8560MFP Multifunction Product
