Xerox 8510 manual Pull the waste tray labeled B completely out of the system

Maintenance and Cleaning

2.Pull the waste tray (labeled B) completely out of the system.

Warning: The waste tray may be hot; handle it carefully.

8560-056

Note: The waste tray may be locked if the system is in a warm-up cycle or if the ink is cooling following the Eliminate Light Stripes troubleshooting routine. If the tray is locked, close the door and wait 15 minutes before repeating Steps 1 and 2.

3.Empty the waste tray in a waste container. The ink is non-toxic and can be discarded as normal office waste.

8560-057

Note: The waste tray must be out of the system for more than five seconds or you will continue to receive a Waste Tray Full message on the control panel.

Phaser® 8510/8560MFP Multifunction Product

8-6