Configuring System Information
88 Avidia System Configuration and Management User Manual
Configuring the System Location
The system location information helps you keep track of where each system in the network is
located. To set the system location, type the location command in the following format then
press .
location (<location>|"<location with spaces>")
Parameters
<location>
The location text string can contain any characters and can be any length, up to 256
characters. However, if you include quotation marks in the location text string, the
quotation marks must be preceded by a backward slash (\). You can use multiple words
separated by an underscore.
<location with spaces>
The location with spaces text string can contain any characters and can be any
length, up to 256 characters. You can use multiple words separated by spaces. If you
include quotation marks in the location with spaces text string, the quotation
marks must be preceded by a backward slash (\).
Examples
::system=> location Building_A (Sets location to Building_A.)
::system=> location "Building A" (Sets location to Building A.)
::system=> location Building_\"A\" (Sets location to Building_"A".)
ENTER