Performing System Diagnostics
600 Avidia System Configuration and Management User Manual
2From the NAND EEPROM/DOSFS Menu you can do the following:
•Test the read/write functionality of the NAND EEPROM by typing t then pressing
. The system runs a test and reports the results on the screen.
•View a directory of the files contained in the management card NVRAM by type d
then pressing . You may want to do this to verify that the image file was
successfully downloaded from the boot server.
•Specify a file to boot from the management card by typing l<filename> then
pressing , where <filename> is the complete filename and extension of the
file you want to load. You may want to do this to load a different image file than the
file that is set as the default boot file.
•View the content of any text file by typing r<filename> then pressing ,
where <filename> is the complete filename and extension of the file you want to
view.
•To make the amcprof.txt file on the management card read-only, type n. The
amcprof.txt file contains the management card hardware and software serial and
revision numbers.
•To view binary image file information, such as the version number, processor name
and revision number, type v<filename> where <filename> is the complete
file name and extension of the binary fil e for which you want to view information.
•If the EEPROM Test (option t) fails, which indicates that the EEPROM has been
corrupted, type u then press to reformat the EEPROM. The EEPROM is
reformatted (restored to its original factory condition).
•Type x then press to return to the DMU Test Main Menu.
Testing the TRAM CUBIT
From the DMU Test Main Menu, type 3 then press . The system tests the CUBIT,
reports the results on the screen, and displays the DMU Test Main Menu.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER