Modifying a Frame Relay Configuration
476 Avidia System Configuration and Management User Manual
3To modify the administrative status, in the Admin Status box select the desired setting (Up to
activate the frame channel card and line card connection or Down to deactivate it).
4In the Data Link row, unless LMI Type is set to None you can do the following:
aTo modify the poll interval value, in the Poll Interval box type the value in seconds. The
valid range is 5 to 30, with 10 as the default.
bTo modify the inquiry interval value, in the Inquiry Interval box type the value. The valid
range is 1 to 255, with 6 as the default.
cTo modify the error threshold, in the Error Threshold box type the value. The valid range
is 1 to 10, with 3 as the default.
dTo modify the monitor events value, in the Monitor Events box type the value. The valid
range is 1 to 10, with 4 as the default.
5If Interworking FRF.5 displays, you can do the following:
aTo modify the Rx LP mode, in the Rx LP Mode box select the desired setting (1 or 2).
bTo modify the Tx LP mode, in the Tx LP Mode box select the desired setting (1 or 2).
cTo modify the CLP mask, in the CLP Mask box select the mask used when Tx LP Mode
is set to 2 (0 or 1).