ADC SWD4573I1 C ONFIGURING SDSL C ELL L INE P

Chapter6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 119
The following screen illustrates an example of both show sdsl commands.
CONFIGURING SDSL CELL LINE PROFILES
SDSL cell line profiles contain a preconfigured set of parameters, including the rate adaptation
mode and the transmit rate. SDSL cell port configuration requires you to apply an SDSL cell
line profile to the line, therefore you must configure the desired SDSL cell line profile before
configuring the SDSL cell port. A default profile exists with an index of 1. You cannot delete
the default profile.
You configure SDSL cell line profiles from the ::line=> prompt. From the ::root=>
prompt, type the following command, then press to display the ::line=> prompt.
configuration sdsl cell profile line
Adding SDSL Cell Line Profiles
Currently, Fixed Rate is the only supported rate adaptation mode, therefore all SDSL cell line
profiles are automatically configured for Fixed Rate.
From the ::line=> prompt, type the new command in the following format then press
to create a new SDSL cell line profile.
new <rate>
::frame=> show Line Alarm Admin
Port Profile Profile Status
4.1 1 1 up
4.2 2 4 down
::frame=> show 4.1
Line Alarm Admin
Port Profile Profile Status
4.1 1 1 up
ENTER
ENTER