Chapter22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 461
3In the ATM System Prefix box, type the ATM prefix for the entire Avidia system, from 0 to
19 octets.
4Use the Type box to select the type of ATM interface for the selected card:
•IISP Private—an interface between two Avidia systems that uses IISP static routes for
line card redundancy.
•UNI31 Private—an interface between Avidia systems or between an Avidia system and
a modem.
•UNI31 Public—an interface between the Avidia system and an ATM network switch.
5In the Side box, select the side of the connection the ATM interface is located, either User
or Network.
6Do one of the following:
•To activate the settings and close the ATM System Interface window, click Set, then in
the confirmation dialog, click Back.
•To cancel the settings and close the ATM System Interface window, click Cancel.