Configuring System Trap Generation Status
382 Avidia System Configuration and Management User Manual
CONFIGURING SYSTEM TRAP GENERATION STATUS
Traps are messages sent from the management card regarding system events, such as alarms.
The Avidia system distinguishes between two types of traps. Agent authentication traps are
generated when the system receives an invalid SNMP community string. (See “Configuring
Community Strings” on page97 for more information on community strings.) General traps are
generated in response to system events such as alarms and configuration changes. You must
specify whether or not you want the system to generate each type of trap.
1In the System Settings window Agent Trap box, select enable or disable to enable or disable
all trap generation other than the agent authentication trap.
2In the Agent Authentication Trap box, select enable or disable to enable or disable agent
authentication error trap generation.
3Do one of the following:
•To activate the new settings, click Set.
•To cancel the new settings, click Get. You can only cancel the new settings if you have
not yet clicked Set.
CONFIGURING BOOT FILE INFORMATION
You must specify the location from which to boot the management card image file. For an
explanation of Avidia image files, see “Avidia System File Management” on page 8.
1In the System Settings window Boot Mode box, do one of the following:
•Click nvram to set the boot location to management card NVRAM.
•Click network to set the boot location to an external TFTP server using TFTP protocol.