Chapter8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 167
Parameter
<index>
The PVPC Table row index number of the primary PVPC for which you want to switch
traffic from the backup PVPC back to the primary PVPC.
Example
::pvpc=> restore 3
Changing Cell Channel Card PVPC Admin Status
1From the ::pvpc=> prompt, type show then press to display the configured
parameters for all PVPCs.
2Note the index number of the PVPC for which you want to change the status.
3Type the admin command in the following format then press .
admin <index> (up|down)
Parameters
<index>
The index number of the PVPC you want to activate or deactivate.
(up|down)
Type up to activate the PVPC; type down to deactivate it.
Example
::pvpc=> admin 2 up
ENTER
ENTER