Chapter8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 183
Changing Frame Channel Card PVCC Admin Status
1From the ::pvcc=> prompt, type show then press to display the configured
parameters for all PVCCs.
2Note the index number of the PVCC you want to activate or deactivate.
3Type the admin command in the following format then press .
admin <index> (up|down)
Parameters
<index>
The index number of the PVCC you want to activate or deactivate.
(up|down)
Type up to activate the PVCC. Type down to deactivate the PVCC.
Example
::pvcc=> admin 2 up
Deleting Primary and Backup Frame Channel Card PVCCs
You can delete primary and backup PVCCs from the ::pvcc=> prompt.
1From the ::pvcc=> prompt, type show then press to display the configured
parameters for all PVCCs.
2Note the index number of the PVCC you want to delete (or for which you want to delete a
backup PVCC).
3Type the delete command in the following format then press .
delete <index> [-backup]
If you remove a card from the system, the PVCCs associated with the ports on
that card are disabled, however the PVCC configuration is not automatically
removed from the PVCC table. Be sure to delete unused PVCC configurations
so the PVCC configuration table accurately reflects the PVCCs in use in the
system.
ENTER
ENTER
ENTER
ENTER