Chapter22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 445
1In the PVCC Configuration Table window, click .
The PVCC Configuration Table window displays. The PVCC Configuration Table index number
is automatically assigned, therefore no Index box displays.
2In the Admin Status box, select the desired setting (Up or Down).
Up activates the PVCC. Down deactivates the PVCC.
3In the Channel Slot box, select the slot number you want t o use for this PVCC.
4In the Channel Port box, select the port number you want to use for this PVCC.
5In the Channel VPI box, type the subscriber-side VPI for this PVCC. (The VPI is always zero
for frame channel cards.)
See the table on page24 for a summary of the supported VPI ranges for each card.
6In the Channel VCI box, type a subscriber-side VCI for this PVCC.
Be sure the VPI/VCI combination specified in this step and Step5 are not already in use on
this port. Open the PVCC Configuration Table window to view the configured VCIs. See the
table on page 24 for a summary of the supported VCI ranges for each card.
7In the Channel Type box, select the service type. TLS is the default service type for all
channel cards except IDSL.
For an IDSL channel card, select the service type that is the same as that of the IDSL
modem. Select one: TLS, RAMP1483, or PPP.