Chapter6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 109
CONFIGURING ADSL SERVICE
Before configuring an ADSL port, make sure you have:
You configure ADSL channels from the ::adsl=> prompt. From the ::root=> prompt,
type the following command then press to display the ::adsl=> prompt.
configuration adsl

Adding ADSL Port Configurations

Each ADSL port is automatically assigned a default configuration. The default profile index
number for each adsl profile type is 1. This procedure describes how to modify the configuration
to reflect the desired service.
1From the ::adsl=> prompt, type the following command then press to display
the ::line=> prompt.
profile line
2Type show then press to display the configured line profiles.
3Note the index number of the line profile you want to assign to the channel.
4Type the following command then press to display the ::alarm=> prompt.
configuration adsl profile alarm
5Type show then press to display the configured alarm profiles.
6Note the index number of the alarm profile you want to assign to the channel.
7Type the following command then press to display the ::adsl=> prompt.
configuration adsl
8Type the set command in the following format then press .
set <port> <lpindex> <apindex> (up|down)
Set up the desired ADSL line profile (see “Adding ADSL Line Profiles” on page100 for
instructions).
Set up the desired ADSL alarm profile (see “Adding ADSL Alarm Profiles” on page104
for instructions).
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER