Chapter8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 195
Parameters
<slot.port>
The SPVC channel card slot and port (format slot.port).
<vpi>
The VPI of the VCC between the CPE and the line card.
<vci>
The VCI of the VCC between the CPE and the line card.
Example
::spvc=> delete 4.3 100 100
Restarting SPVCs
You can manually attempt to restart an SPVC that is not operational. From the appropriate
::spvc=> prompt, type the restart command in the following format, then press .
restart <slot.port> <vpi> <vci>
Parameters
<slot.port>
The SPVC channel card slot and port (format slot.port).
<vpi>
The VPI of the VCC between the CPE and the line card.
<vci>
The VCI of the VCC between the CPE and the line card.
Example
::spvc=> restart 4.3 100 100
ENTER