ADC SWD4573I1 CONFIGURING SYSTEM BRIDGING AND STP P

Configuring System Bridging and STP Parameters
500 Avidia System Configuration and Management User Manual
7In the Password box, type the text string you want to use for a password, then in the Confirm
Password box, re-type the text string.
The text string can be any length and can use any keyboard character.
8Do one of the following:
•To activate the settings and close the Modify RIP Configuration window, click Set, then
in the confirmation dialog click Back.
•To cancel the settings and close the Modify RIP Configuration window, click Cancel.
CONFIGURING SYSTEM BRIDGING AND STP
PARAMETERS
You can configure several system-wide bridging and Spanning-Tree Protocol (STP)
parameters. Each parameter comes preconfigured with a default value, however you can modify
each setting.
You modify system bridging and STP parameters from the System Bridging Configuration
window. To one of the following to open the System Bridging Configuration window:
•In the Site Map Navigation window, click System Bridging Configuration.
•In the Tree Navigation window, click Configuration Management, Bridge/Route, System Bridging
Configuration.