Chapter17: System Maintenance and Administration
Avidia System Configuration and Management User Manual 367
Rebooting an Individual Card
To reboot an individual card, from the ::admin prompt type the reboot command in the
following format then press .
reboot <slot> [-y]
Parameter
<slot>
The slot in which the card you want to reboot is installed.
<-y>
Results in the specified card rebooting without first displaying a confirmation message. If you
omit this parameter, a confirmation message displays. Type to reboot the card or type to
cancel the command.
Example
::admin=> reboot 4
SETTING THE COMMAND-LINE INTERFACE TIMEOUT OPTION
You can specify the length of time after which the command-line interface automatically logs
the current user off if no keyboard input is received. You set the command-line interface timeout
option from the ::admin=> prompt. From the ::root=> prompt, type admin then press
to display the ::admin=> prompt.
From the ::admin=> prompt, type the timeout command in the following format then press
.
timeout [<minutes>]
ENTER
Y N
ENTER
ENTER