Chapter6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 135
Example
::clock=> show 5
The following screen illustrates an example of the show clock command.
Modifying IDSL Port Configurations
Each IDSL port is automatically assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1You configure IDSL ports from the ::idsl=> prompt. From the ::root=> prompt,
type the following command then press to display the ::idsl=> prompt.
configuration idsl
2From the ::idsl=> prompt, type the following command then press to display
the ::line=> prompt.
profile line
3Type show then press to display the configured line profiles.
4Note the index number of the line profile you want to assign to the channel.
5Type the following command then press to display the ::alarm=> prompt.
configuration idsl profile alarm
6Type show then press to display the configured alarm profiles.
7Note the index number of the alarm profile you want to assign to the channel.
8Type the following command then press to display the ::idsl=> prompt.
configuration idsl
9Type the set command in the following format then press .
set <port> <lpindex> <apindex> (up|down) [<circuit id>]
::clock=> show 5
IDSL clock source for slot 5: local
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER