Chapter22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 435
2In the Admin Status box, select the administrative status for the PVPC (Up or Down).
Up activates the PVPC. Down deactivates the PVPC.
3In the Channel Slot box, select the channel-side card slot number you want to use for
this PVPC.
4In the Channel Port box, select the channel-side card port number you want to use for
this PVPC.
5In the Channel VPI box, type the subscriber-side VPI for this PVPC.
See the table on page24 for a summary of the supported VPI ranges for each card.
6In the Line Slot box, select the slot number of the line-side card you want to use for this
PVPC.
7In the Line Port box, select the line-side card port number you want to use for this PVPC.
8In the Line VPI box, type a network-side VPI for this PVPC.
See the table on page24 for a summary of the supported VPI ranges for each card.
9If you want to create a backup PVPC for the primary PVPC, in the Line box select Backup.
Then, do the following:
aIn the Backup Slot box, select the slot number for the secondary line-side card you want
to use for this backup PVPC.
bIn the Backup Port box, select the port number for the secondary line-side card you want
to use for this backup PVPC.
cIn the Backup VPI box, type a network-side VPI for this backup PVPC. The VPI
valuecan be either the same value as the primary PVPC or a different value for the
backup PVPC.
See the table on page24 for a summary of the supported VPI ranges for each card.
10 In the Traffic Profile box, click Browse to display the ATM Traffic Descriptor Configuration Table
window.