Chapter19: Configuring System Parameters
Avidia System Configuration and Management User Manual 381
CONFIGURING MANAGEMENT CARD IP ADDRESSES
You set the management card IP address, subnet mask and default gateway (if one exists) to
enable communication with external networks. While you must initially set the IP addresses
using the command-line interface, you can change this information using the Web interface. All
IP addresses use the format xxx.xxx.xxx.xxx.
1In the System Settings window, click Set IPs.
The Set IP Address window displays.
2In the AMC Card Ethernet Port IP Address box, type the IP address of the management card
Ethernet port.
The default management card IP address is 192.168.0.1.
3In the AMC Card Ethernet Port IP Subnet Mask box, type the IP subnet mask of the management
card Ethernet port.
4In the AMC Card Ethernet Port IP Default Gateway box, type the management card default
gateway (router) IP address, if one exists.
A gateway is a router on the network through which the Avidia system can communicate
with external networks. The default gateway default IP address is 192.168.0.100.
5To activate the new default gateway IP address, click Set, otherwise click Close.
You cannot use IP addresses 192.168.1.0 through 192.168.21.255 with subnet
mask 255.255.255.0, as these addresses are restricted for internal Avidia
system use.